Inetcam Mobile Gateway Manuel d'utilisateur télécharger pdf (Page 4)

Draft version 1.7 4

Inetcam® and iMViewer™ are the property of Inetcam, Inc.

All of these items may be changed by opening a browser on a PC and going to the IP address of

the Mobile Gateway™ video server by entering that address in the browser address bar (e.g.

http://192.168.0.2.)

Hardware installation

For best results, hardware connections should be initiated in the following order:

1. Connect the network cable to the Mobile Gateway™ video server NIC.

2. Plug the cameras into the Mobile Gateway™ video server.

3. Connect the power cord to the Mobile Gateway™ video server.

4. Power on the Mobile Gateway™ video server.

5. Run the Mobile Gateway™ video server Finder utility to configure the Mobile Gateway™

video server.

Using The Mobile Gateway™ Finder Utility

Mobile Gateway™ configures in much the same way as a “standard” analog to IP video server:

use the Mobile Gateway™ Finder utility to locate servers and configure them remotely on the

network.

To use the Mobile Gateway™ Finder utility, insert the CD into a CD-ROM. Browse to the CD

Drive on the PC and launch Finder.exe. The utility will launch:

1 2 3 4 5 6 7 8 9 ... 18 19

Pas de commentaire

Inetcam Mobile Gateway Manuel d'utilisateur Page 4